Merbok
Merbok Gold MDF Thinpanels

Merbok Gold Thinpanel is manufactured to the highest standards making the panel most suitable for a wide range of manufacturing, trade and building applications where a thin, flexible board with a fine texture is required.

Shaping Your Designs

Merbok Gold Thinpanel’s excellent physical properties make the panel most suitable for a wide range of manufacturing, trade and building applications where thin boards are required.

Merbok Gold Thinpanel’s homogeneous fine texture, high bonding strength and hard, smooth surface allows endless design and finished product opportunities.

Merbok Gold Thinpanel is recommended for interior applications such as lacquered, veneered or film faced wardrobe backs, drawer bottoms, cupboard backs, curved feature wall panels, door skins and other applications requiring a thin panel.

Merbok Gold Thinpanel is recommended for interior use only and should not be exposed to damp conditions or high humidity.

STANDARD PRODUCTS

Merbok Gold Thinpanel is available in various standard thicknesses from 2.2mm to 6mm, and 2.3 un-sanded boards. The standard panel sizes are 2440mm x 1220mm, 2440mm x 1830mm and 2440mm x 2135mm. MDF panels conforming to E1 (<8mg / 100g) when tested according EN 120:2004 and (<0.5 <1.5mg / L) when tested according to JISA5905:2004 are also available.

STORING AND HANDLING MERBOK THINPANELS

Merbok Gold Thinpanel should be stored undercover in a dry, well ventilated area. Sheets should be stored flat on >18mm base boards with uniformly and vertically aligned support bearers which should be placed evenly at 600mm centres. All packing materials should be disposed of thoughtfully.

WORKING WITH MERBOK THINPANELS

Merbok Gold Thinpanel can be cut, machined, filed and drilled with commonly available woodworking equipment. The best cutting can be obtained using 72-96 teeth saw blades. PVA wood glues are recommended for gluing prior to fixing. Oil, water-based paints and varnishes may be used. Refer to Merbok’s website for detailed information.

It is recommended that when working with MDF suitable dust masks are worn and the work environment is well ventilated.

Merbok Gold - MDF Thinpanel

PROPERTY
Thickness Tolerance EN324-1 mm ± 0.2 ± 0.2 ± 0.2
Length & Width Tolerance EN324-1 mm/m ± 3 ± 3 ± 3
Squareness EN324-2 mm/m ± 1.5 ± 1.5 ± 1.5
Average Density EN323 Kg/m3 >750 >740 >730
Internal Bond EN319 N/mm2 0.70 0.65 0.65
Modulus Of Rupture EN310 N/mm2 40 40 40
Modulus Of Elasticity EN310 N/mm2 3000 3000 2700
Surface Soundness EN311 N 1000 1000 1000
Screw Holding (Face) EN320 N N/A N/A N/A
Screw Holding (Edge) EN320 N N/A N/A N/A
Thickness Swell (24hr) EN317 % 20 18 17
Water Absorption (24hr) EN317 % 45 40 35
* Average Value

Merbok Gold MDF Thinpanels & It's Applications